
Product images only for reference. Actual product may vary. Email sales@endusersupplies.com for discounts.
CTS-SX20N-P40-K9
CTS-SX20N-P40-K9 – Cisco TelePresence System SX20 Quick Set with Precision HD 1080p 12x Camera
- Secure Payments
- Fast Shipping
- Huge Savings
Cisco TelePresence Software Version TC 5.1 or later
Cisco Collaboration Endpoint Software Version 8.0 or later (requires Touch 10 or TRC6 remote control)
Product delivered with
SX20 Codec
Cisco Precision Camera (choice of Precision 40 or 12X)
Cisco Table Microphone 20
TRC6 remote control
Cables and power supply
Optional hardware components
Cisco Touch 10 control unit
Wall mount kit
Additional microphone
Presentation cable (VGA or HDMI)
Camera mount bracket for P40 or 12X
Spare: TRC5 remote control to be used with TC 7.3 software can be acquired as spare
Bandwidth
H.323 and SIP up to 6 Mbps
Minimum bandwidth for resolution/frame rate
720p30 from 768 kbps
720p60 from 1152 kbps
1080p30 from 1472 kbps
1080p60 from 2560 kbps
Firewall Traversal
Cisco TelePresence Expressway Technology
H.460.18, H.460.19 firewall traversal
Video Standards
H.263, H.263+, H.264
Video Features
Native 16:9 widescreen
Advanced screen layouts
Local auto-layout
Video Inputs – (Two Inputs)
One HDMI and One DVI-I (Analog and Digital); supports formats up to maximum 1920×1080 @ 60 fps (HD1080p60), including:
640×480
720×480
720×576
800×600
848×480
1024×768
1152×864
1280×720
1280×1024
1280×768
1280×800
1280×960
1360×768
1366×768
1400×1050
1440×900
1680×1050
1920×1080
Video Outputs – (Two Outputs)
Two HDMI Outputs Supported Formats:
1920 x 1080@60 fps (1080p60)
1920 x 1080@50 fps (1080p50)
1280 x 720@60 fps (720p60)
1280 x 720@50 fps (720p50)
1366 x 768@60 fps (WXGA)4
1360 x 768@60 fps(WXGA)4
1280 x 768@60 fps (WXGA)4
1280 x 1024@60 fps4
1024 x 768@60 fps4
VESA Monitor Power Management (DPM)
CEC Power Management supported on HDMI output
EDID
Live Video Resolutions (Encode and Decode)
176 x 144@30, 60 fps (QCIF) (Decode only)
352 x 288@30, 60 fps (CIF)
512 x 288@30, 60 fps (w288p)
576 x 448@30, 60 fps (448p)
768 x 448@30, 60 fps (w448p)
704 x 576@30, 60 fps (4CIF)
1024 x 576@30, 60 fps (w576p)
640 x 480@30, 60 fps (VGA)
800 x 600@30, 60 fps (SVGA)
1024 x 768@30, 60 fps (XGA)
1280 x 768@30, 60 fps (WXGA)
1280 x 720@30, 60 fps (HD720p)
1920 x 1080@30, 60 fps (HD1080p)
Audio Standards
G.711, G.722, G.722.1, G.728, G.729, AAC-LD and OPUS
Audio Features
High quality 20 KHz stereo
Two acoustic echo cancellers
Automatic Gain Control (AGC)
Integration with third-party audio systems
Automatic noise reduction
Active lip synchronization
Audio Inputs – (Four Inputs)
Two microphones, 4-pin minijack
One minijack for line-in (stereo)
One audio in from camera (HDMI)
Audio Outputs – (Two Outputs)
One minijack for line out (stereo)
One HDMI, (digital main audio)
Dual Stream
H.239 (H.323) dual stream
BFCP (SIP) dual stream
Support resolutions up to 1080p) at 30 frames per second
Multipoint Support
Four-way embedded SIP/H.323 conferencing capability with MultiSite option
Ad-hoc conferencing supported
Unified Communications Manager Media Resource Group (requires a Cisco TelePresence MCU)
Cisco TelePresence Multiway [requires Cisco TelePresence Video Communication Server (Cisco VCS) and a Cisco TelePresence MCU] 4
Ability to natively join multipoint conferences hosted on Cisco Telepresence Multipoint Switch (CTMS)3
Switched conferencing (SVC)2
MultiSite Features (Embedded Multipoint) (Optional upgrade)
Adaptive SIP/H.323 MultiSite; resolution up to 720p30
3-way resolution up to 720p30
4-way resolution up to 576p30
Full individual audio and video transcoding
Individual layouts in MultiSite continuous presence
H.323/SIP/VoIP in the same conference
Support for Presentation (H.239/BFCP) from any participant at resolutions up to 1080p15
Best Impression (automatic continuous presence layouts)
H.264, encryption and dual stream from any site
IP downspeeding
Participants can be added by dialing in or host can dial out
Conference rates up to 6 Mbps
Protocols
H.323
SIP
ISDN (requires Cisco ISDN Link)
Embedded Encryption
H.323 and SIP point-to-point
Standards-based: H.235 v3 and Advanced Encryption Standard (AES)
Automatic key generation and exchange
Supported in dual stream
IP Network Features
DNS lookup for service configuration
Differentiated services (quality of service [QoS])
IP-adaptive bandwidth management (including flow control)
Automatic gatekeeper discovery
Dynamic playout and lip-sync buffering
H.245 Dual Tone Multi-frequency (DTMF) tones in H.323
RFC 4733 DTMF tones in SIP
Date and time support using Network Time Protocol (NTP)
Packet loss-based down speeding
Uniform Resource Identifier (URI) dialing
TCP/IP
DHCP
802.1x network authentication
802.1Q Virtual LAN
802.1p (QoS and class of service [QoS])
ClearPath
Cisco Unified Communications Manager (requires Cisco Unified Communications Manager Version 8.6 or later)
Native registration with Cisco Unified Communications Manager
Basic Cisco Unified Communications Manager provisioning
Software upgrade from Cisco Unified Communications Manager
Cisco Discovery Protocol and DHCP option 150 support
Basic telephony features such as hold/resume/transfer and Corporate Directory lookup
Cisco Video Communication Server
Recommend latest software
IPv6 Network Support
Single call stack support for both H323 and SIP
Dual-stack IPv4 and IPv6 for DHCP, SSH, HTTP, HTTPS, DNS, DiffServ
Support for both Static and Automatic IP configuration (stateless address auto configuration)
Security Features
Management using HTTPS and SSH
IP administration password
Menu administration password
Disable IP services
Network settings protection
Certificate management
Certificate Authority Proxy Function (CAPF) support for additional Security
Manufacturer-Installed Certificates (MIC)
Locally Significant Certificates (LSC)
X.509 Digital Certificates (DER encoded binary); both DER and Base-64 formats are acceptable for the client and server certificates; certificates with a key size of 1024, 2048, and 4096 are supported
Network Interfaces
One LAN and Ethernet (RJ-45) 10/100/1000 Mbit
Other Interfaces
Two USB ports can be used for serial control
System Management
Support for the Cisco TelePresence Management Suite
Total management using embedded SNMP, Telnet, SSH, XML, SOAP
Remote software upload: using web server, secure copy (SCP), HTTP, HTTPS
Cisco Touch 10 control unit (optional)
Remote control and on-screen menu system
Directory Services
Support for local directories (My Contacts)
Unlimited entries using server directory supporting LDAP and H.350 (requires Cisco TelePresence Management Suite)
Unlimited number for corporate directory (through Cisco TelePresence Management Suite)
Received calls with date and time
Placed calls with date and time
Missed calls with date and time
Power
Auto-sensing power supply
100 – 240 VAC, 50/60 Hz
Maximum 40 watts for codec and main camera
Operating Temperature and Humidity
0 Degree C to 40 Degree C (32 Degree F to 104 Degree F) ambient temperature
10% to 90% Relative Humidity (RH)
Storage and Transport Temperature
-20 Degree C to 60 Degree C (-4 Degree F to 140 Degree F) at RH 10% – 90% (non -condensing)
SX20 Codec Dimensions
Width: 11.8 inches (30.0 cm)
Height: 1.4 inches (3.4 cm)
Depth: 7.1 inches (18.0 cm)
Weight: 3.1 pounds (1.4 kg)