HPE Aruba 8320 – Switch – L3 – managed – 48 x 1 Gigabit / 10 Gigabit Ethernet + 6 x 40 Gigabit QSFP+ – rack-mountable – with X472 5 Fans 2 Power Supply The 8320 provides advanced line rate 10GbE/40GbE in a compact 1U form factor. The 8320 is based on the ArubaOS-CX, a modern software system for the enterprise core that automates and simplifies many critical and complex network tasks, delivers enhanced fault tolerance and facilitates zero-service disruption during planned or unplanned control-plane events. The Network Analytics Engine framework is made up of a time series database and associated REST APIs.

MAIN SPECIFICATIONS
Product Description	HPE Aruba 8320 – switch – 48 ports – managed – rack-mountable – with X472 5 Fans 2 Power Supply
Device Type	Switch – 48 ports – L3 – managed – with X472 5 Fans 2 Power Supply
Enclosure Type	Rack-mountable 1U
Subtype	10 Gigabit Ethernet
Ports	48 x 1 Gigabit / 10 Gigabit Ethernet + 6 x 40 Gigabit QSFP+
Performance	Switching capacity: 2.5 Tbps  Forwarding performance: 1.905 Mpps
Capacity	Virtual interfaces (VLANs) per port for 802.1q: 4096
MAC Address Table Size	14K entries
Jumbo Frame Support	9KB
Routing Protocol	OSPF, IGMPv2, IGMP, VRRP, IGMPv3, GRE, static IPv6 routing, ECMP
Remote Management Protocol	SNMP, RMON, SNMP 3, SNMP 2c, TFTP, SSH, CLI, SFTP
Features	VPN support, IPv6 support, sFlow, Spanning Tree Protocol (STP) support, Rapid Spanning Tree Protocol (RSTP) support, Multiple Spanning Tree Protocol (MSTP) support, Access Control List (ACL) support, Quality of Service (QoS), Uni-Directional Link Detection (UDLD), Rapid Per-VLAN Spanning Tree Plus (PVRST+), IPv4 support, Link Aggregation Control Protocol (LACP), redundant hot swappable fans, packet storm protection, Strict Priority (SP), Loopback, Bridge protocol data unit (BPDU), Multi-Chassis Link Aggregation (MLAG), Protocol Independent Multicast (PIM)
Compliant Standards	IEEE 802.3z, IEEE 802.1D, IEEE 802.1Q, IEEE 802.1p, IEEE 802.3x, IEEE 802.3ad (LACP), IEEE 802.1w, IEEE 802.3ae, IEEE 802.1s, IEEE 802.1ad, IEEE 802.1t, IEEE 802.1ae, IEEE 802.1ab (LLDP), IEEE 802.1ak, IEEE 802.3ba, IEEE 802.1AX
Power	AC 120/230 V (50/65 Hz)
Power Redundancy	Yes
Dimensions (WxDxH)	18.6 in x 17.4 in x 1.7 in
Weight	20.94 lbs
Manufacturer Warranty	Not Applicable
EXTENDED SPECIFICATIONS
General
Device Type	Switch – 48 ports – L3 – managed – with X472 5 Fans 2 Power Supply
Enclosure Type	Rack-mountable 1U
Subtype	10 Gigabit Ethernet
Ports	48 x 1 Gigabit / 10 Gigabit Ethernet + 6 x 40 Gigabit QSFP+
Performance	Switching capacity: 2.5 Tbps  Forwarding performance: 1.905 Mpps
Capacity	Virtual interfaces (VLANs) per port for 802.1q: 4096
MAC Address Table Size	14K entries
Jumbo Frame Support	9KB
Routing Protocol	OSPF, IGMPv2, IGMP, VRRP, IGMPv3, GRE, static IPv6 routing, ECMP
Remote Management Protocol	SNMP, RMON, SNMP 3, SNMP 2c, TFTP, SSH, CLI, SFTP
Encryption Algorithm	FIPS 140-2
Authentication Method	RADIUS, TACACS+, Secure Shell v.2 (SSH2)
Features	VPN support, IPv6 support, sFlow, Spanning Tree Protocol (STP) support, Rapid Spanning Tree Protocol (RSTP) support, Multiple Spanning Tree Protocol (MSTP) support, Access Control List (ACL) support, Quality of Service (QoS), Uni-Directional Link Detection (UDLD), Rapid Per-VLAN Spanning Tree Plus (PVRST+), IPv4 support, Link Aggregation Control Protocol (LACP), redundant hot-swappable fans, packet storm protection, Strict Priority (SP), Loopback, Bridge protocol data unit (BPDU), Multi-Chassis Link Aggregation (MLAG), Protocol Independent Multicast (PIM)
Compliant Standards	IEEE 802.3z, IEEE 802.1D, IEEE 802.1Q, IEEE 802.1p, IEEE 802.3x, IEEE 802.3ad (LACP), IEEE 802.1w, IEEE 802.3ae, IEEE 802.1s, IEEE 802.1ad, IEEE 802.1t, IEEE 802.1ae, IEEE 802.1ab (LLDP), IEEE 802.1ak, IEEE 802.3ba, IEEE 802.1AX
Processor	1: 2 GHz
RAM	16 GB
Flash Memory	8 MB
Expansion / Connectivity
Interfaces	48 x 1/10Gbit LAN – 1 x serial RJ-45 – 1 x console (micro-USB) – 1 x RJ-45 – 6 x 40Gbit LAN QSFP+
Power
Power Device	Internal power supply – hot-plug
Installed Qty	2 (installed) / 2 (max)
Power Redundancy	Yes
Power Redundancy Scheme	1+1
Power Provided	400 Watt
Voltage Required	AC 120/230 V (50/65 Hz)
Power Consumption Operational	348 Watt
Miscellaneous
Rack Mounting Kit	Included
MTBF	275,339 hours
Compliant Standards	CISPR 24, EN 61000-3-2, IEC 61000-3-2, IEC 61000-3-3, IEC 61000-4-8, EN 61000-3-3, EN 61000-4-4, EN 61000-4-2, EN 61000-4-3, EN 61000-4-6, EN 61000-4-5, EN 61000-4-11, RoHS, UL 60950-1, WEEE, AS/NZS, EN 50581:2012, CNS 13438, CSA 22.2 No. 60950-1, EN 55024:2010, EN 60825-1:2007, FCC CFR47 Part 15 A, ICES-003 issue 5, Directive 2014/35/EU, EN 55032:2015, IEC 60825-1:2007 Class 1, CISPR 32:2015 Class A, CISPR 32 Class A, IEC 60950-1:2005 (ed.2)+A1:2009+A2:2013, EN 60950-1:2006+A11:2009+A1:2010+A12:2011+A2:2013
TAA Compliant	Yes
Dimensions & Weight
Width	18.6 in
Depth	17.4 in
Height	1.7 in
Weight	20.94 lbs
Manufacturer Warranty
Service & Support	Not Applicable
Environmental Parameters
Min Operating Temperature	32 Degree Fahrenheit
Max Operating Temperature	104 Degree Fahrenheit
Humidity Range Operating	5 – 95% (non-condensing)
Min Storage Temperature	-40 Degree Fahrenheit
Max Storage Temperature	158 Degree Fahrenheit
Humidity Range Storage	5 – 95% (non-condensing)